[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4. Printing Output

One of the most common programming actions is to print, or output, some or all of the input. Use the print statement for simple output, and the printf statement for fancier formatting. The print statement is not limited when computing which values to print. However, with two exceptions, you cannot specify how to print them--how many columns, whether to use exponential notation or not, and so on. (For the exceptions, see section Output Separators, and Controlling Numeric Output with print.) For printing with specifications, you need the printf statement (see section Using printf Statements for Fancier Printing).

Besides basic and formatted printing, this chapter also covers I/O redirections to files and pipes, introduces the special file names that gawk processes internally, and discusses the close built-in function.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1 The print Statement

The print statement is used to produce output with simple, standardized formatting. Specify only the strings or numbers to print, in a list separated by commas. They are output, separated by single spaces, followed by a newline. The statement looks like this:

 
print item1, item2, …

The entire list of items may be optionally enclosed in parentheses. The parentheses are necessary if any of the item expressions uses the `>' relational operator; otherwise it could be confused with a redirection (see section Redirecting Output of print and printf).

The items to print can be constant strings or numbers, fields of the current record (such as $1), variables, or any awk expression. Numeric values are converted to strings and then printed.

The simple statement `print' with no items is equivalent to `print $0': it prints the entire current record. To print a blank line, use `print ""', where "" is the empty string. To print a fixed piece of text, use a string constant, such as "Don't Panic", as one item. If you forget to use the double-quote characters, your text is taken as an awk expression, and you will probably get an error. Keep in mind that a space is printed between any two items.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2 Examples of print Statements

Each print statement makes at least one line of output. However, it isn't limited to only one line. If an item value is a string that contains a newline, the newline is output along with the rest of the string. A single print statement can make any number of lines this way.

The following is an example of printing a string that contains embedded newlines (the `\n' is an escape sequence, used to represent the newline character; see section Escape Sequences):

 
$ awk 'BEGIN { print "line one\nline two\nline three" }'
-| line one
-| line two
-| line three

The next example, which is run on the `inventory-shipped' file, prints the first two fields of each input record, with a space between them:

 
$ awk '{ print $1, $2 }' inventory-shipped
-| Jan 13
-| Feb 15
-| Mar 15
…

A common mistake in using the print statement is to omit the comma between two items. This often has the effect of making the items run together in the output, with no space. The reason for this is that juxtaposing two string expressions in awk means to concatenate them. Here is the same program, without the comma:

 
$ awk '{ print $1 $2 }' inventory-shipped
-| Jan13
-| Feb15
-| Mar15
…

To someone unfamiliar with the `inventory-shipped' file, neither example's output makes much sense. A heading line at the beginning would make it clearer. Let's add some headings to our table of months ($1) and green crates shipped ($2). We do this using the BEGIN pattern (see section The BEGIN and END Special Patterns) so that the headings are only printed once:

 
awk 'BEGIN {  print "Month Crates"
              print "----- ------" }
           {  print $1, $2 }' inventory-shipped

When run, the program prints the following:

 
Month Crates
----- ------
Jan 13
Feb 15
Mar 15
…

The only problem, however, is that the headings and the table data don't line up! We can fix this by printing some spaces between the two fields:

 
awk 'BEGIN { print "Month Crates"
             print "----- ------" }
           { print $1, "     ", $2 }' inventory-shipped

Lining up columns this way can get pretty complicated when there are many columns to fix. Counting spaces for two or three columns is simple, but any more than this can take up a lot of time. This is why the printf statement was created (see section Using printf Statements for Fancier Printing); one of its specialties is lining up columns of data.

NOTE: You can continue either a print or printf statement simply by putting a newline after any comma (see section awk Statements Versus Lines).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.3 Output Separators

As mentioned previously, a print statement contains a list of items separated by commas. In the output, the items are normally separated by single spaces. However, this doesn't need to be the case; a single space is only the default. Any string of characters may be used as the output field separator by setting the built-in variable OFS. The initial value of this variable is the string " "--that is, a single space.

The output from an entire print statement is called an output record. Each print statement outputs one output record, and then outputs a string called the output record separator (or ORS). The initial value of ORS is the string "\n"; i.e., a newline character. Thus, each print statement normally makes a separate line.

In order to change how output fields and records are separated, assign new values to the variables OFS and ORS. The usual place to do this is in the BEGIN rule (see section The BEGIN and END Special Patterns), so that it happens before any input is processed. It can also be done with assignments on the command line, before the names of the input files, or using the `-v' command-line option (see section Command-Line Options). The following example prints the first and second fields of each input record, separated by a semicolon, with a blank line added after each newline:

 
$ awk 'BEGIN { OFS = ";"; ORS = "\n\n" }
>            { print $1, $2 }' BBS-list
-| aardvark;555-5553
-|
-| alpo-net;555-3412
-|
-| barfly;555-7685
…

If the value of ORS does not contain a newline, the program's output is run together on a single line.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4 Controlling Numeric Output with print

When the print statement is used to print numeric values, awk internally converts the number to a string of characters and prints that string. awk uses the sprintf function to do this conversion (see section String-Manipulation Functions). For now, it suffices to say that the sprintf function accepts a format specification that tells it how to format numbers (or strings), and that there are a number of different ways in which numbers can be formatted. The different format specifications are discussed more fully in Format-Control Letters.

The built-in variable OFMT contains the default format specification that print uses with sprintf when it wants to convert a number to a string for printing. The default value of OFMT is "%.6g". The way print prints numbers can be changed by supplying different format specifications as the value of OFMT, as shown in the following example:

 
$ awk 'BEGIN {
>   OFMT = "%.0f"  # print numbers as integers (rounds)
>   print 17.23, 17.54 }'
-| 17 18

According to the POSIX standard, awk's behavior is undefined if OFMT contains anything but a floating-point conversion specification. (d.c.)


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.5 Using printf Statements for Fancier Printing

For more precise control over the output format than what is normally provided by print, use printf. printf can be used to specify the width to use for each item, as well as various formatting choices for numbers (such as what output base to use, whether to print an exponent, whether to print a sign, and how many digits to print after the decimal point). This is done by supplying a string, called the format string, that controls how and where to print the other arguments.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.5.1 Introduction to the printf Statement

A simple printf statement looks like this:

 
printf format, item1, item2, …

The entire list of arguments may optionally be enclosed in parentheses. The parentheses are necessary if any of the item expressions use the `>' relational operator; otherwise, it can be confused with a redirection (see section Redirecting Output of print and printf).

The difference between printf and print is the format argument. This is an expression whose value is taken as a string; it specifies how to output each of the other arguments. It is called the format string.

The format string is very similar to that in the ISO C library function printf. Most of format is text to output verbatim. Scattered among this text are format specifiers--one per item. Each format specifier says to output the next item in the argument list at that place in the format.

The printf statement does not automatically append a newline to its output. It outputs only what the format string specifies. So if a newline is needed, you must include one in the format string. The output separator variables OFS and ORS have no effect on printf statements. For example:

 
$ awk 'BEGIN {
>    ORS = "\nOUCH!\n"; OFS = "+"
>    msg = "Dont Panic!"
>    printf "%s\n", msg
> }'
-| Dont Panic!

Here, neither the `+' nor the `OUCH' appear when the message is printed.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.5.2 Format-Control Letters

A format specifier starts with the character `%' and ends with a format-control letter--it tells the printf statement how to output one item. The format-control letter specifies what kind of value to print. The rest of the format specifier is made up of optional modifiers that control how to print the value, such as the field width. Here is a list of the format-control letters:

%c

This prints a number as an ASCII character; thus, `printf "%c", 65' outputs the letter `A'. (The output for a string value is the first character of the string.)

%d, %i

These are equivalent; they both print a decimal integer. (The `%i' specification is for compatibility with ISO C.)

%e, %E

These print a number in scientific (exponential) notation; for example:

 
printf "%4.3e\n", 1950

prints `1.950e+03', with a total of four significant figures, three of which follow the decimal point. (The `4.3' represents two modifiers, discussed in the next subsection.) `%E' uses `E' instead of `e' in the output.

%f

This prints a number in floating-point notation. For example:

 
printf "%4.3f", 1950

prints `1950.000', with a total of four significant figures, three of which follow the decimal point. (The `4.3' represents two modifiers, discussed in the next subsection.)

On systems supporting IEEE 754 floating point format, values representing negative infinity are formatted as `-inf' or `-infinity', and positive infinity as `inf' and `infinity'. The special "not a number" value formats as `-nan' or `nan'.

%F

Like %f but the infinity and "not a number" values are spelled using uppercase letters.

The %F format is a POSIX extension to ISO C; not all systems support it. On those that don't, gawk uses %f instead.

%g, %G

These print a number in either scientific notation or in floating-point notation, whichever uses fewer characters; if the result is printed in scientific notation, `%G' uses `E' instead of `e'.

%o

This prints an unsigned octal integer.

%s

This prints a string.

%u

This prints an unsigned decimal integer. (This format is of marginal use, because all numbers in awk are floating-point; it is provided primarily for compatibility with C.)

%x, %X

These print an unsigned hexadecimal integer; `%X' uses the letters `A' through `F' instead of `a' through `f'.

%%

This isn't a format-control letter, but it does have meaning--the sequence `%%' outputs one `%'; it does not consume an argument and it ignores any modifiers.

NOTE: When using the integer format-control letters for values that are outside the range of the widest C integer type, gawk switches to the `%g' format specifier. If `--lint' is provided on the command line (see section Command-Line Options), gawk warns about this. Other versions of awk may print invalid values or do something else entirely. (d.c.)


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.5.3 Modifiers for printf Formats

A format specification can also include modifiers that can control how much of the item's value is printed, as well as how much space it gets. The modifiers come between the `%' and the format-control letter. We will use the bullet symbol "•" in the following examples to represent spaces in the output. Here are the possible modifiers, in the order in which they may appear:

N$

An integer constant followed by a `$' is a positional specifier. Normally, format specifications are applied to arguments in the order given in the format string. With a positional specifier, the format specification is applied to a specific argument, instead of what would be the next argument in the list. Positional specifiers begin counting with one. Thus:

 
printf "%s %s\n", "don't", "panic"
printf "%2$s %1$s\n", "panic", "don't"

prints the famous friendly message twice.

At first glance, this feature doesn't seem to be of much use. It is in fact a gawk extension, intended for use in translating messages at runtime. See section Rearranging printf Arguments, which describes how and why to use positional specifiers. For now, we will not use them.

-

The minus sign, used before the width modifier (see later on in this table), says to left-justify the argument within its specified width. Normally, the argument is printed right-justified in the specified width. Thus:

 
printf "%-4s", "foo"

prints `foo•'.

space

For numeric conversions, prefix positive values with a space and negative values with a minus sign.

+

The plus sign, used before the width modifier (see later on in this table), says to always supply a sign for numeric conversions, even if the data to format is positive. The `+' overrides the space modifier.

#

Use an "alternate form" for certain control letters. For `%o', supply a leading zero. For `%x' and `%X', supply a leading `0x' or `0X' for a nonzero result. For `%e', `%E', and `%f', the result always contains a decimal point. For `%g' and `%G', trailing zeros are not removed from the result.

0

A leading `0' (zero) acts as a flag that indicates that output should be padded with zeros instead of spaces. This applies even to non-numeric output formats. (d.c.) This flag only has an effect when the field width is wider than the value to print.

'

A single quote or apostrophe character is a POSIX extension to ISO C. It indicates that the integer part of a floating point value, or the entire part of an integer decimal value, should have a thousands-separator character in it. This only works in locales that support such characters. For example:

 
$ cat thousands.awk          Show source program
-| BEGIN { printf "%'d\n", 1234567 }
$ LC_ALL=C gawk -f thousands.awk
-| 1234567                   Results in "C" locale
$ LC_ALL=en_US.UTF-8 gawk -f thousands.awk
-| 1,234,567                 Results in US English UTF locale

For more information about locales and internationalization issues, see Where You Are Makes A Difference.

NOTE: The `'' flag is a nice feature, but its use complicates things: it becomes difficult to use it in command-line programs. For information on appropriate quoting tricks, see Shell-Quoting Issues.

width

This is a number specifying the desired minimum width of a field. Inserting any number between the `%' sign and the format-control character forces the field to expand to this width. The default way to do this is to pad with spaces on the left. For example:

 
printf "%4s", "foo"

prints `•foo'.

The value of width is a minimum width, not a maximum. If the item value requires more than width characters, it can be as wide as necessary. Thus, the following:

 
printf "%4s", "foobar"

prints `foobar'.

Preceding the width with a minus sign causes the output to be padded with spaces on the right, instead of on the left.

.prec

A period followed by an integer constant specifies the precision to use when printing. The meaning of the precision varies by control letter:

%e, %E, %f

Number of digits to the right of the decimal point.

%g, %G

Maximum number of significant digits.

%d, %i, %o, %u, %x, %X

Minimum number of digits to print.

%s

Maximum number of characters from the string that should print.

Thus, the following:

 
printf "%.4s", "foobar"

prints `foob'.

The C library printf's dynamic width and prec capability (for example, "%*.*s") is supported. Instead of supplying explicit width and/or prec values in the format string, they are passed in the argument list. For example:

 
w = 5
p = 3
s = "abcdefg"
printf "%*.*s\n", w, p, s

is exactly equivalent to:

 
s = "abcdefg"
printf "%5.3s\n", s

Both programs output `••abc'. Earlier versions of awk did not support this capability. If you must use such a version, you may simulate this feature by using concatenation to build up the format string, like so:

 
w = 5
p = 3
s = "abcdefg"
printf "%" w "." p "s\n", s

This is not particularly easy to read but it does work.

C programmers may be used to supplying additional `l', `L', and `h' modifiers in printf format strings. These are not valid in awk. Most awk implementations silently ignore these modifiers. If `--lint' is provided on the command line (see section Command-Line Options), gawk warns about their use. If `--posix' is supplied, their use is a fatal error.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.5.4 Examples Using printf

The following is a simple example of how to use printf to make an aligned table:

 
awk '{ printf "%-10s %s\n", $1, $2 }' BBS-list

This command prints the names of the bulletin boards ($1) in the file `BBS-list' as a string of 10 characters that are left-justified. It also prints the phone numbers ($2) next on the line. This produces an aligned two-column table of names and phone numbers, as shown here:

 
$ awk '{ printf "%-10s %s\n", $1, $2 }' BBS-list
-| aardvark   555-5553
-| alpo-net   555-3412
-| barfly     555-7685
-| bites      555-1675
-| camelot    555-0542
-| core       555-2912
-| fooey      555-1234
-| foot       555-6699
-| macfoo     555-6480
-| sdace      555-3430
-| sabafoo    555-2127

In this case, the phone numbers had to be printed as strings because the numbers are separated by a dash. Printing the phone numbers as numbers would have produced just the first three digits: `555'. This would have been pretty confusing.

It wasn't necessary to specify a width for the phone numbers because they are last on their lines. They don't need to have spaces after them.

The table could be made to look even nicer by adding headings to the tops of the columns. This is done using the BEGIN pattern (see section The BEGIN and END Special Patterns) so that the headers are only printed once, at the beginning of the awk program:

 
awk 'BEGIN { print "Name      Number"
             print "----      ------" }
     { printf "%-10s %s\n", $1, $2 }' BBS-list

The above example mixed print and printf statements in the same program. Using just printf statements can produce the same results:

 
awk 'BEGIN { printf "%-10s %s\n", "Name", "Number"
             printf "%-10s %s\n", "----", "------" }
     { printf "%-10s %s\n", $1, $2 }' BBS-list

Printing each column heading with the same format specification used for the column elements ensures that the headings are aligned just like the columns.

The fact that the same format specification is used three times can be emphasized by storing it in a variable, like this:

 
awk 'BEGIN { format = "%-10s %s\n"
             printf format, "Name", "Number"
             printf format, "----", "------" }
     { printf format, $1, $2 }' BBS-list

At this point, it would be a worthwhile exercise to use the printf statement to line up the headings and table data for the `inventory-shipped' example that was covered earlier in the section on the print statement (see section The print Statement).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.6 Redirecting Output of print and printf

So far, the output from print and printf has gone to the standard output, usually the terminal. Both print and printf can also send their output to other places. This is called redirection.

A redirection appears after the print or printf statement. Redirections in awk are written just like redirections in shell commands, except that they are written inside the awk program.

There are four forms of output redirection: output to a file, output appended to a file, output through a pipe to another command, and output to a coprocess. They are all shown for the print statement, but they work identically for printf:

print items > output-file

This type of redirection prints the items into the output file named output-file. The file name output-file can be any expression. Its value is changed to a string and then used as a file name (see section Expressions).

When this type of redirection is used, the output-file is erased before the first output is written to it. Subsequent writes to the same output-file do not erase output-file, but append to it. (This is different from how you use redirections in shell scripts.) If output-file does not exist, it is created. For example, here is how an awk program can write a list of BBS names to one file named `name-list', and a list of phone numbers to another file named `phone-list':

 
$ awk '{ print $2 > "phone-list"
>        print $1 > "name-list" }' BBS-list
$ cat phone-list
-| 555-5553
-| 555-3412
…
$ cat name-list
-| aardvark
-| alpo-net
…

Each output file contains one name or number per line.

print items >> output-file

This type of redirection prints the items into the pre-existing output file named output-file. The difference between this and the single-`>' redirection is that the old contents (if any) of output-file are not erased. Instead, the awk output is appended to the file. If output-file does not exist, then it is created.

print items | command

It is also possible to send output to another program through a pipe instead of into a file. This type of redirection opens a pipe to command, and writes the values of items through this pipe to another process created to execute command.

The redirection argument command is actually an awk expression. Its value is converted to a string whose contents give the shell command to be run. For example, the following produces two files, one unsorted list of BBS names, and one list sorted in reverse alphabetical order:

 
awk '{ print $1 > "names.unsorted"
       command = "sort -r > names.sorted"
       print $1 | command }' BBS-list

The unsorted list is written with an ordinary redirection, while the sorted list is written by piping through the sort utility.

The next example uses redirection to mail a message to the mailing list `bug-system'. This might be useful when trouble is encountered in an awk script run periodically for system maintenance:

 
report = "mail bug-system"
print "Awk script failed:", $0 | report
m = ("at record number " FNR " of " FILENAME)
print m | report
close(report)

The message is built using string concatenation and saved in the variable m. It's then sent down the pipeline to the mail program. (The parentheses group the items to concatenate--see String Concatenation.)

The close function is called here because it's a good idea to close the pipe as soon as all the intended output has been sent to it. See section Closing Input and Output Redirections, for more information.

This example also illustrates the use of a variable to represent a file or command--it is not necessary to always use a string constant. Using a variable is generally a good idea, because (if you mean to refer to that same file or command) awk requires that the string value be spelled identically every time.

print items |& command

This type of redirection prints the items to the input of command. The difference between this and the single-`|' redirection is that the output from command can be read with getline. Thus command is a coprocess, which works together with, but subsidiary to, the awk program.

This feature is a gawk extension, and is not available in POSIX awk. See section Using getline from a Coprocess, for a brief discussion. See section Two-Way Communications with Another Process, for a more complete discussion.

Redirecting output using `>', `>>', `|', or `|&' asks the system to open a file, pipe, or coprocess only if the particular file or command you specify has not already been written to by your program or if it has been closed since it was last written to.

It is a common error to use `>' redirection for the first print to a file, and then to use `>>' for subsequent output:

 
# clear the file
print "Don't panic" > "guide.txt"
…
# append
print "Avoid improbability generators" >> "guide.txt"

This is indeed how redirections must be used from the shell. But in awk, it isn't necessary. In this kind of case, a program should use `>' for all the print statements, since the output file is only opened once. (It happens that if you mix `>' and `>>' that output is produced in the expected order. However, mixing the operators for the same file is definitely poor style, and is confusing to readers of your program.)

As mentioned earlier (see section Points to Remember About getline), many Many awk implementations limit the number of pipelines that an awk program may have open to just one! In gawk, there is no such limit. gawk allows a program to open as many pipelines as the underlying operating system permits.

Advanced Notes: Piping into sh

A particularly powerful way to use redirection is to build command lines and pipe them into the shell, sh. For example, suppose you have a list of files brought over from a system where all the file names are stored in uppercase, and you wish to rename them to have names in all lowercase. The following program is both simple and efficient:

 
{ printf("mv %s %s\n", $0, tolower($0)) | "sh" }

END { close("sh") }

The tolower function returns its argument string with all uppercase characters converted to lowercase (see section String-Manipulation Functions). The program builds up a list of command lines, using the mv utility to rename the files. It then sends the list to the shell for execution.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.7 Special File Names in gawk

gawk provides a number of special file names that it interprets internally. These file names provide access to standard file descriptors, process-related information, and TCP/IP networking.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.7.1 Special Files for Standard Descriptors

Running programs conventionally have three input and output streams already available to them for reading and writing. These are known as the standard input, standard output, and standard error output. These streams are, by default, connected to your terminal, but they are often redirected with the shell, via the `<', `<<', `>', `>>', `>&', and `|' operators. Standard error is typically used for writing error messages; the reason there are two separate streams, standard output and standard error, is so that they can be redirected separately.

In other implementations of awk, the only way to write an error message to standard error in an awk program is as follows:

 
print "Serious error detected!" | "cat 1>&2"

This works by opening a pipeline to a shell command that can access the standard error stream that it inherits from the awk process. This is far from elegant, and it is also inefficient, because it requires a separate process. So people writing awk programs often don't do this. Instead, they send the error messages to the terminal, like this:

 
print "Serious error detected!" > "/dev/tty"

This usually has the same effect but not always: although the standard error stream is usually the terminal, it can be redirected; when that happens, writing to the terminal is not correct. In fact, if awk is run from a background job, it may not have a terminal at all. Then opening `/dev/tty' fails.

gawk provides special file names for accessing the three standard streams, as well as any other inherited open files. If the file name matches one of these special names when gawk redirects input or output, then it directly uses the stream that the file name stands for. These special file names work for all operating systems that gawk has been ported to, not just those that are POSIX-compliant:

`/dev/stdin'

The standard input (file descriptor 0).

`/dev/stdout'

The standard output (file descriptor 1).

`/dev/stderr'

The standard error output (file descriptor 2).

`/dev/fd/N'

The file associated with file descriptor N. Such a file must be opened by the program initiating the awk execution (typically the shell). Unless special pains are taken in the shell from which gawk is invoked, only descriptors 0, 1, and 2 are available.

The file names `/dev/stdin', `/dev/stdout', and `/dev/stderr' are aliases for `/dev/fd/0', `/dev/fd/1', and `/dev/fd/2', respectively. However, they are more self-explanatory. The proper way to write an error message in a gawk program is to use `/dev/stderr', like this:

 
print "Serious error detected!" > "/dev/stderr"

Note the use of quotes around the file name. Like any other redirection, the value must be a string. It is a common error to omit the quotes, which leads to confusing results.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.7.2 Special Files for Process-Related Information

gawk also provides special file names that give access to information about the running gawk process. Each of these "files" provides a single record of information. To read them more than once, they must first be closed with the close function (see section Closing Input and Output Redirections). The file names are:

`/dev/pid'

Reading this file returns the process ID of the current process, in decimal form, terminated with a newline.

`/dev/ppid'

Reading this file returns the parent process ID of the current process, in decimal form, terminated with a newline.

`/dev/pgrpid'

Reading this file returns the process group ID of the current process, in decimal form, terminated with a newline.

`/dev/user'

Reading this file returns a single record terminated with a newline. The fields are separated with spaces. The fields represent the following information:

$1

The return value of the getuid system call (the real user ID number).

$2

The return value of the geteuid system call (the effective user ID number).

$3

The return value of the getgid system call (the real group ID number).

$4

The return value of the getegid system call (the effective group ID number).

If there are any additional fields, they are the group IDs returned by the getgroups system call. (Multiple groups may not be supported on all systems.)

These special file names may be used on the command line as data files, as well as for I/O redirections within an awk program. They may not be used as source files with the `-f' option.

NOTE: The special files that provide process-related information are now considered obsolete and will disappear entirely in the next release of gawk. gawk prints a warning message every time you use one of these files. To obtain process-related information, use the PROCINFO array. See section Built-in Variables That Convey Information.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.7.3 Special Files for Network Communications

Starting with version 3.1 of gawk, awk programs can open a two-way TCP/IP connection, acting as either a client or a server. This is done using a special file name of the form:

 
`/inet/protocol/local-port/remote-host/remote-port'

The protocol is one of `tcp', `udp', or `raw', and the other fields represent the other essential pieces of information for making a networking connection. These file names are used with the `|&' operator for communicating with a coprocess (see section Two-Way Communications with Another Process). This is an advanced feature, mentioned here only for completeness. Full discussion is delayed until Using gawk for Network Programming.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.7.4 Special File Name Caveats

Here is a list of things to bear in mind when using the special file names that gawk provides:


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.8 Closing Input and Output Redirections

If the same file name or the same shell command is used with getline more than once during the execution of an awk program (see section Explicit Input with getline), the file is opened (or the command is executed) the first time only. At that time, the first record of input is read from that file or command. The next time the same file or command is used with getline, another record is read from it, and so on.

Similarly, when a file or pipe is opened for output, the file name or command associated with it is remembered by awk, and subsequent writes to the same file or command are appended to the previous writes. The file or pipe stays open until awk exits.

This implies that special steps are necessary in order to read the same file again from the beginning, or to rerun a shell command (rather than reading more output from the same command). The close function makes these things possible:

 
close(filename)

or:

 
close(command)

The argument filename or command can be any expression. Its value must exactly match the string that was used to open the file or start the command (spaces and other "irrelevant" characters included). For example, if you open a pipe with this:

 
"sort -r names" | getline foo

then you must close it with this:

 
close("sort -r names")

Once this function call is executed, the next getline from that file or command, or the next print or printf to that file or command, reopens the file or reruns the command. Because the expression that you use to close a file or pipeline must exactly match the expression used to open the file or run the command, it is good practice to use a variable to store the file name or command. The previous example becomes the following:

 
sortcom = "sort -r names"
sortcom | getline foo
…
close(sortcom)

This helps avoid hard-to-find typographical errors in your awk programs. Here are some of the reasons for closing an output file:

If you use more files than the system allows you to have open, gawk attempts to multiplex the available open files among your data files. gawk's ability to do this depends upon the facilities of your operating system, so it may not always work. It is therefore both good practice and good portability advice to always use close on your files when you are done with them. In fact, if you are using a lot of pipes, it is essential that you close commands when done. For example, consider something like this:

 
{
    …
    command = ("grep " $1 " /some/file | my_prog -q " $3)
    while ((command | getline) > 0) {
        process output of command
    }
    # need close(command) here
}

This example creates a new pipeline based on data in each record. Without the call to close indicated in the comment, awk creates child processes to run the commands, until it eventually runs out of file descriptors for more pipelines.

Even though each command has finished (as indicated by the end-of-file return status from getline), the child process is not terminated;(21) more importantly, the file descriptor for the pipe is not closed and released until close is called or awk exits.

close will silently do nothing if given an argument that does not represent a file, pipe or coprocess that was opened with a redirection.

Note also that `close(FILENAME)' has no "magic" effects on the implicit loop that reads through the files named on the command line. It is, more likely, a close of a file that was never opened, so awk silently does nothing.

When using the `|&' operator to communicate with a coprocess, it is occasionally useful to be able to close one end of the two-way pipe without closing the other. This is done by supplying a second argument to close. As in any other call to close, the first argument is the name of the command or special file used to start the coprocess. The second argument should be a string, with either of the values "to" or "from". Case does not matter. As this is an advanced feature, a more complete discussion is delayed until Two-Way Communications with Another Process, which discusses it in more detail and gives an example.

Advanced Notes: Using close's Return Value

In many versions of Unix awk, the close function is actually a statement. It is a syntax error to try and use the return value from close: (d.c.)

 
command = "…"
command | getline info
retval = close(command)  # syntax error in most Unix awks

gawk treats close as a function. The return value is -1 if the argument names something that was never opened with a redirection, or if there is a system problem closing the file or process. In these cases, gawk sets the built-in variable ERRNO to a string describing the problem.

In gawk, when closing a pipe or coprocess (input or output), the return value is the exit status of the command.(22) Otherwise, it is the return value from the system's close or fclose C functions when closing input or output files, respectively. This value is zero if the close succeeds, or -1 if it fails.

The POSIX standard is very vague; it says that close returns zero on success and non-zero otherwise. In general, different implementations vary in what they report when closing pipes; thus the return value cannot be used portably. (d.c.)


[ << ] [ >> ]           [Top] [Contents] [Index] [ ? ]

This document was generated on December, 30 2007 using texi2html 1.76.