3.1.78 PhrasingSlur

PhrasingSlur objects are created by: Phrasing_slur_engraver.

Standard settings:

control-points (list):

ly:slur::calc-control-points

List of offsets (number pairs) that form control points for the tie, slur, or bracket shape. For Béziers, this should list the control points of a third-order Bézier curve.

direction (direction):

ly:slur::calc-direction

If side-axis is 0 (or #X), then this property determines whether the object is placed #LEFT, #CENTER or #RIGHT with respect to the other object. Otherwise, it determines whether the object is placed #UP, #CENTER or #DOWN. Numerical values may also be used: #UP=1, #DOWN=-1, #LEFT=-1, #RIGHT=1, #CENTER=0.

springs-and-rods (boolean):

ly:spanner::set-spacing-rods

Dummy variable for triggering spacing routines.

Y-extent (pair of numbers):

ly:slur::height

Hard coded extent in Y direction.

stencil (unknown):

ly:slur::print

The symbol to print.

thickness (number):

1.1

Line thickness, generally measured in line-thickness.

minimum-length (dimension, in staff space):

1.5

Try to make a spanner at least this long, normally in the horizontal direction. This requires an appropriate callback for the springs-and-rods property. If added to a Tie, this sets the minimum distance between noteheads.

height-limit (dimension, in staff space):

2.0

Maximum slur height: The longer the slur, the closer it is to this height.

ratio (number):

0.333

Parameter for slur shape. The higher this number, the quicker the slur attains its height-limit.

This object supports the following interface(s): spanner-interface, slur-interface and grob-interface.


Internals Reference