The QTransform class specifies 2D transformations of a coordinate system. More...

#include <QTransform>

This class was introduced in Qt 4.3.

enum | TransformationType { TxNone, TxTranslate, TxScale, TxRotate, TxShear, TxProject } |

QTransform () | |

QTransform ( qreal m11, qreal m12, qreal m13, qreal m21, qreal m22, qreal m23, qreal m31, qreal m32, qreal m33 = 1.0 ) | |

QTransform ( qreal m11, qreal m12, qreal m21, qreal m22, qreal dx, qreal dy ) | |

QTransform ( const QMatrix & matrix ) | |

qreal | m11 () const |

qreal | m12 () const |

qreal | m13 () const |

qreal | m21 () const |

qreal | m22 () const |

qreal | m23 () const |

qreal | m31 () const |

qreal | m32 () const |

qreal | m33 () const |

QTransform | adjoint () const |

qreal | determinant () const |

qreal | dx () const |

qreal | dy () const |

QTransform | inverted ( bool * invertible = 0 ) const |

bool | isAffine () const |

bool | isIdentity () const |

bool | isInvertible () const |

bool | isRotating () const |

bool | isScaling () const |

bool | isTranslating () const |

void | map ( qreal x, qreal y, qreal * tx, qreal * ty ) const |

QPointF | map ( const QPointF & p ) const |

QPoint | map ( const QPoint & point ) const |

QLine | map ( const QLine & l ) const |

QLineF | map ( const QLineF & line ) const |

QPolygonF | map ( const QPolygonF & polygon ) const |

QPolygon | map ( const QPolygon & polygon ) const |

QRegion | map ( const QRegion & region ) const |

QPainterPath | map ( const QPainterPath & path ) const |

void | map ( int x, int y, int * tx, int * ty ) const |

QRectF | mapRect ( const QRectF & rectangle ) const |

QRect | mapRect ( const QRect & rectangle ) const |

QPolygon | mapToPolygon ( const QRect & rectangle ) const |

void | reset () |

QTransform & | rotate ( qreal angle, Qt::Axis axis = Qt::ZAxis ) |

QTransform & | rotateRadians ( qreal angle, Qt::Axis axis = Qt::ZAxis ) |

QTransform & | scale ( qreal sx, qreal sy ) |

void | setMatrix ( qreal m11, qreal m12, qreal m13, qreal m21, qreal m22, qreal m23, qreal m31, qreal m32, qreal m33 ) |

QTransform & | shear ( qreal sh, qreal sv ) |

const QMatrix & | toAffine () const |

QTransform & | translate ( qreal dx, qreal dy ) |

QTransform | transposed () const |

TransformationType | type () const |

operator QVariant () const | |

bool | operator!= ( const QTransform & matrix ) const |

QTransform | operator* ( const QTransform & matrix ) const |

QTransform & | operator*= ( const QTransform & matrix ) |

QTransform & | operator*= ( qreal scalar ) |

QTransform & | operator+= ( qreal scalar ) |

QTransform & | operator-= ( qreal scalar ) |

QTransform & | operator/= ( qreal scalar ) |

QTransform & | operator= ( const QTransform & matrix ) |

bool | operator== ( const QTransform & matrix ) const |

QTransform | fromScale ( qreal sx, qreal sy ) |

QTransform | fromTranslate ( qreal dx, qreal dy ) |

bool | quadToQuad ( const QPolygonF & one, const QPolygonF & two, QTransform & trans ) |

bool | quadToSquare ( const QPolygonF & quad, QTransform & trans ) |

bool | squareToQuad ( const QPolygonF & quad, QTransform & trans ) |

bool | qFuzzyCompare ( const QTransform & t1, const QTransform & t2 ) |

QPoint | operator* ( const QPoint & point, const QTransform & matrix ) |

QPointF | operator* ( const QPointF & point, const QTransform & matrix ) |

QLineF | operator* ( const QLineF & line, const QTransform & matrix ) |

QLine | operator* ( const QLine & line, const QTransform & matrix ) |

QPolygon | operator* ( const QPolygon & polygon, const QTransform & matrix ) |

QPolygonF | operator* ( const QPolygonF & polygon, const QTransform & matrix ) |

QRegion | operator* ( const QRegion & region, const QTransform & matrix ) |

QPainterPath | operator* ( const QPainterPath & path, const QTransform & matrix ) |

QDataStream & | operator<< ( QDataStream & stream, const QTransform & matrix ) |

QDataStream & | operator>> ( QDataStream & stream, QTransform & matrix ) |

The QTransform class specifies 2D transformations of a coordinate system.

A transformation specifies how to translate, scale, shear, rotate or project the coordinate system, and is typically used when rendering graphics.

QTransform differs from QMatrix^{(obsolete)} in that it is a true 3x3 matrix, allowing perspective transformations. QTransform's toAffine() method allows casting QTransform to QMatrix^{(obsolete)}. If a perspective transformation has been specified on the matrix, then the conversion will cause loss of data.

QTransform is the recommended transformation class in Qt.

A QTransform object can be built using the setMatrix(), scale(), rotate(), translate() and shear() functions. Alternatively, it can be built by applying basic matrix operations. The matrix can also be defined when constructed, and it can be reset to the identity matrix (the default) using the reset() function.

The QTransform class supports mapping of graphic primitives: A given point, line, polygon, region, or painter path can be mapped to the coordinate system defined by *this* matrix using the map() function. In case of a rectangle, its coordinates can be transformed using the mapRect() function. A rectangle can also be transformed into a *polygon* (mapped to the coordinate system defined by *this* matrix), using the mapToPolygon() function.

QTransform provides the isIdentity() function which returns true if the matrix is the identity matrix, and the isInvertible() function which returns true if the matrix is non-singular (i.e. AB = BA = I). The inverted() function returns an inverted copy of *this* matrix if it is invertible (otherwise it returns the identity matrix), and adjoint() returns the matrix's classical adjoint. In addition, QTransform provides the determinant() function which returns the matrix's determinant.

Finally, the QTransform class supports matrix multiplication, addition and subtraction, and objects of the class can be streamed as well as compared.

When rendering graphics, the matrix defines the transformations but the actual transformation is performed by the drawing routines in QPainter.

By default, QPainter operates on the associated device's own coordinate system. The standard coordinate system of a QPaintDevice has its origin located at the top-left position. The *x* values increase to the right; *y* values increase downward. For a complete description, see the coordinate system documentation.

QPainter has functions to translate, scale, shear and rotate the coordinate system without using a QTransform. For example:

void SimpleTransformation::paintEvent(QPaintEvent *) { QPainter painter(this); painter.setPen(QPen(Qt::blue, 1, Qt::DashLine)); painter.drawRect(0, 0, 100, 100); painter.rotate(45); painter.setFont(QFont("Helvetica", 24)); painter.setPen(QPen(Qt::black, 1)); painter.drawText(20, 10, "QTransform"); } |

Although these functions are very convenient, it can be more efficient to build a QTransform and call QPainter::setTransform() if you want to perform more than a single transform operation. For example:

void CombinedTransformation::paintEvent(QPaintEvent *) { QPainter painter(this); painter.setPen(QPen(Qt::blue, 1, Qt::DashLine)); painter.drawRect(0, 0, 100, 100); QTransform transform; transform.translate(50, 50); transform.rotate(45); transform.scale(0.5, 1.0); painter.setTransform(transform); painter.setFont(QFont("Helvetica", 24)); painter.setPen(QPen(Qt::black, 1)); painter.drawText(20, 10, "QTransform"); } |

A QTransform object contains a 3 x 3 matrix. The `m31` (`dx`) and `m32` (`dy`) elements specify horizontal and vertical translation. The `m11` and `m22` elements specify horizontal and vertical scaling. The `m21` and `m12` elements specify horizontal and vertical *shearing*. And finally, the `m13` and `m23` elements specify horizontal and vertical projection, with `m33` as an additional projection factor.

QTransform transforms a point in the plane to another point using the following formulas:

x' = m11*x + m21*y + dx y' = m22*y + m12*x + dy if (is not affine) { w' = m13*x + m23*y + m33 x' /= w' y' /= w' }

The point *(x, y)* is the original point, and *(x', y')* is the transformed point. *(x', y')* can be transformed back to *(x, y)* by performing the same operation on the inverted() matrix.

The various matrix elements can be set when constructing the matrix, or by using the setMatrix() function later on. They can also be manipulated using the translate(), rotate(), scale() and shear() convenience functions. The currently set values can be retrieved using the m11(), m12(), m13(), m21(), m22(), m23(), m31(), m32(), m33(), dx() and dy() functions.

Translation is the simplest transformation. Setting `dx` and `dy` will move the coordinate system `dx` units along the X axis and `dy` units along the Y axis. Scaling can be done by setting `m11` and `m22`. For example, setting `m11` to 2 and `m22` to 1.5 will double the height and increase the width by 50%. The identity matrix has `m11`, `m22`, and `m33` set to 1 (all others are set to 0) mapping a point to itself. Shearing is controlled by `m12` and `m21`. Setting these elements to values different from zero will twist the coordinate system. Rotation is achieved by setting both the shearing factors and the scaling factors. Perspective transformation is achieved by setting both the projection factors and the scaling factors.

Here's the combined transformations example using basic matrix operations:

void BasicOperations::paintEvent(QPaintEvent *) { double pi = 3.14; double a = pi/180 * 45.0; double sina = sin(a); double cosa = cos(a); QTransform translationTransform(1, 0, 0, 1, 50.0, 50.0); QTransform rotationTransform(cosa, sina, -sina, cosa, 0, 0); QTransform scalingTransform(0.5, 0, 0, 1.0, 0, 0); QTransform transform; transform = scalingTransform * rotationTransform * translationTransform; QPainter painter(this); painter.setPen(QPen(Qt::blue, 1, Qt::DashLine)); painter.drawRect(0, 0, 100, 100); painter.setTransform(transform); painter.setFont(QFont("Helvetica", 24)); painter.setPen(QPen(Qt::black, 1)); painter.drawText(20, 10, "QTransform"); } |

See also QPainter, Coordinate System, Affine Transformations Demo, and Transformations Example.

Constant | Value |
---|---|

QTransform::TxNone | 0x00 |

QTransform::TxTranslate | 0x01 |

QTransform::TxScale | 0x02 |

QTransform::TxRotate | 0x04 |

QTransform::TxShear | 0x08 |

QTransform::TxProject | 0x10 |

Constructs an identity matrix.

All elements are set to zero except `m11` and `m22` (specifying the scale) and `m13` which are set to 1.

See also reset().

Constructs a matrix with the elements, *m11*, *m12*, *m13*, *m21*, *m22*, *m23*, *m31*, *m32*, *m33*.

See also setMatrix().

Constructs a matrix with the elements, *m11*, *m12*, *m21*, *m22*, *dx* and *dy*.

See also setMatrix().

Constructs a matrix that is a copy of the given *matrix*. Note that the `m13`, `m23`, and `m33` elements are set to 0, 0, and 1 respectively.

Returns the horizontal scaling factor.

See also scale() and Basic Matrix Operations.

Returns the vertical shearing factor.

See also shear() and Basic Matrix Operations.

Returns the horizontal projection factor.

See also translate() and Basic Matrix Operations.

Returns the horizontal shearing factor.

See also shear() and Basic Matrix Operations.

Returns the vertical scaling factor.

See also scale() and Basic Matrix Operations.

Returns the vertical projection factor.

See also translate() and Basic Matrix Operations.

Returns the horizontal translation factor.

See also dx(), translate(), and Basic Matrix Operations.

Returns the vertical translation factor.

See also dy(), translate(), and Basic Matrix Operations.

Returns the division factor.

See also translate() and Basic Matrix Operations.

Returns the adjoint of this matrix.

Returns the matrix's determinant.

Returns the horizontal translation factor.

See also m31(), translate(), and Basic Matrix Operations.

Returns the vertical translation factor.

See also translate() and Basic Matrix Operations.

Creates a matrix which corresponds to a scaling of *sx* horizontally and *sy* vertically. This is the same as QTransform().scale(sx, sy) but slightly faster.

This function was introduced in Qt 4.5.

Creates a matrix which corresponds to a translation of *dx* along the x axis and *dy* along the y axis. This is the same as QTransform().translate(dx, dy) but slightly faster.

This function was introduced in Qt 4.5.

Returns an inverted copy of this matrix.

If the matrix is singular (not invertible), the returned matrix is the identity matrix. If *invertible* is valid (i.e. not 0), its value is set to true if the matrix is invertible, otherwise it is set to false.

See also isInvertible().

Returns true if the matrix represent an affine transformation, otherwise returns false.

Returns true if the matrix is the identity matrix, otherwise returns false.

See also reset().

Returns true if the matrix is invertible, otherwise returns false.

See also inverted().

Returns true if the matrix represents some kind of a rotating transformation, otherwise returns false.

See also reset().

Returns true if the matrix represents a scaling transformation, otherwise returns false.

See also reset().

Returns true if the matrix represents a translating transformation, otherwise returns false.

See also reset().

Maps the given coordinates *x* and *y* into the coordinate system defined by this matrix. The resulting values are put in **tx* and **ty*, respectively.

The coordinates are transformed using the following formulas:

x' = m11*x + m21*y + dx y' = m22*y + m12*x + dy if (is not affine) { w' = m13*x + m23*y + m33 x' /= w' y' /= w' }

The point (x, y) is the original point, and (x', y') is the transformed point.

See also Basic Matrix Operations.

This is an overloaded function.

Creates and returns a QPointF object that is a copy of the given point, *p*, mapped into the coordinate system defined by this matrix.

This is an overloaded function.

Creates and returns a QPoint object that is a copy of the given *point*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

This is an overloaded function.

Creates and returns a QLineF object that is a copy of the given line, *l*, mapped into the coordinate system defined by this matrix.

This is an overloaded function.

Creates and returns a QLine object that is a copy of the given *line*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

This is an overloaded function.

Creates and returns a QPolygonF object that is a copy of the given *polygon*, mapped into the coordinate system defined by this matrix.

This is an overloaded function.

Creates and returns a QPolygon object that is a copy of the given *polygon*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

This is an overloaded function.

Creates and returns a QRegion object that is a copy of the given *region*, mapped into the coordinate system defined by this matrix.

Calling this method can be rather expensive if rotations or shearing are used.

This is an overloaded function.

Creates and returns a QPainterPath object that is a copy of the given *path*, mapped into the coordinate system defined by this matrix.

This is an overloaded function.

Maps the given coordinates *x* and *y* into the coordinate system defined by this matrix. The resulting values are put in **tx* and **ty*, respectively. Note that the transformed coordinates are rounded to the nearest integer.

Creates and returns a QRectF object that is a copy of the given *rectangle*, mapped into the coordinate system defined by this matrix.

The rectangle's coordinates are transformed using the following formulas:

x' = m11*x + m21*y + dx y' = m22*y + m12*x + dy if (is not affine) { w' = m13*x + m23*y + m33 x' /= w' y' /= w' }

If rotation or shearing has been specified, this function returns the *bounding* rectangle. To retrieve the exact region the given *rectangle* maps to, use the mapToPolygon() function instead.

See also mapToPolygon() and Basic Matrix Operations.

This is an overloaded function.

Creates and returns a QRect object that is a copy of the given *rectangle*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

Creates and returns a QPolygon representation of the given *rectangle*, mapped into the coordinate system defined by this matrix.

The rectangle's coordinates are transformed using the following formulas:

Polygons and rectangles behave slightly differently when transformed (due to integer rounding), so `matrix.map(QPolygon(rectangle))` is not always the same as `matrix.mapToPolygon(rectangle)`.

See also mapRect() and Basic Matrix Operations.

Creates a transformation matrix, *trans*, that maps a four-sided polygon, *one*, to another four-sided polygon, *two*. Returns true if the transformation is possible; otherwise returns false.

This is a convenience method combining quadToSquare() and squareToQuad() methods. It allows the input quad to be transformed into any other quad.

See also squareToQuad() and quadToSquare().

Creates a transformation matrix, *trans*, that maps a four-sided polygon, *quad*, to a unit square. Returns true if the transformation is constructed or false if such a transformation does not exist.

See also squareToQuad() and quadToQuad().

Resets the matrix to an identity matrix, i.e. all elements are set to zero, except `m11` and `m22` (specifying the scale) and `m33` which are set to 1.

See also QTransform(), isIdentity(), and Basic Matrix Operations.

Rotates the coordinate system counterclockwise by the given *angle* about the specified *axis* and returns a reference to the matrix.

Note that if you apply a QTransform to a point defined in widget coordinates, the direction of the rotation will be clockwise because the y-axis points downwards.

The angle is specified in degrees.

See also setMatrix().

Rotates the coordinate system counterclockwise by the given *angle* about the specified *axis* and returns a reference to the matrix.

Note that if you apply a QTransform to a point defined in widget coordinates, the direction of the rotation will be clockwise because the y-axis points downwards.

The angle is specified in radians.

See also setMatrix().

Scales the coordinate system by *sx* horizontally and *sy* vertically, and returns a reference to the matrix.

See also setMatrix().

Sets the matrix elements to the specified values, *m11*, *m12*, *m13* *m21*, *m22*, *m23* *m31*, *m32* and *m33*. Note that this function replaces the previous values. QTransform provides the translate(), rotate(), scale() and shear() convenience functions to manipulate the various matrix elements based on the currently defined coordinate system.

See also QTransform().

Shears the coordinate system by *sh* horizontally and *sv* vertically, and returns a reference to the matrix.

See also setMatrix().

Creates a transformation matrix, *trans*, that maps a unit square to a four-sided polygon, *quad*. Returns true if the transformation is constructed or false if such a transformation does not exist.

See also quadToSquare() and quadToQuad().

Returns the QTransform as an affine matrix.

**Warning:** If a perspective transformation has been specified, then the conversion will cause loss of data.

Moves the coordinate system *dx* along the x axis and *dy* along the y axis, and returns a reference to the matrix.

See also setMatrix().

Returns the transpose of this matrix.

Returns the transformation type of this matrix.

The transformation type is the highest enumeration value capturing all of the matrix's transformations. For example, if the matrix both scales and shears, the type would be `TxShear`, because `TxShear` has a higher enumeration value than `TxScale`.

Knowing the transformation type of a matrix is useful for optimization: you can often handle specific types more optimally than handling the generic case.

Returns the transform as a QVariant.

Returns true if this matrix is not equal to the given *matrix*, otherwise returns false.

Returns the result of multiplying this matrix by the given *matrix*.

Note that matrix multiplication is not commutative, i.e. a*b != b*a.

This is an overloaded function.

Returns the result of multiplying this matrix by the given *matrix*.

This is an overloaded function.

Returns the result of performing an element-wise multiplication of this matrix with the given *scalar*.

This is an overloaded function.

Returns the matrix obtained by adding the given *scalar* to each element of this matrix.

This is an overloaded function.

Returns the matrix obtained by subtracting the given *scalar* from each element of this matrix.

This is an overloaded function.

Returns the result of performing an element-wise division of this matrix by the given *scalar*.

Assigns the given *matrix*'s values to this matrix.

Returns true if this matrix is equal to the given *matrix*, otherwise returns false.

Returns true if *t1* and *t2* are equal, allowing for a small fuzziness factor for floating-point comparisons; false otherwise.

This function was introduced in Qt 4.6.

This is the same as *matrix*.map(*point*).

See also QTransform::map().

Same as *matrix*.map(*point*).

See also QTransform::map().

This is the same as *matrix*.map(*line*).

See also QTransform::map().

This is the same as *matrix*.map(*line*).

See also QTransform::map().

This is the same as *matrix*.map(*polygon*).

See also QTransform::map().

This is the same as *matrix*.map(*polygon*).

This function was introduced in Qt 4.3.

See also QTransform::map().

This is the same as *matrix*.map(*region*).

See also QTransform::map().

This is the same as *matrix*.map(*path*).

This function was introduced in Qt 4.3.

See also QTransform::map().

Writes the given *matrix* to the given *stream* and returns a reference to the stream.

This function was introduced in Qt 4.3.

See also Serializing Qt Data Types.

Reads the given *matrix* from the given *stream* and returns a reference to the stream.

This function was introduced in Qt 4.3.

See also Serializing Qt Data Types.

X